Strengthening Pole

Welcome to the internet's gathering place for Purple Martin enthusiasts
Rodger Drye
Posts: 607
Joined: Sun Mar 23, 2014 10:07 am
Location: NC/Mt. Pleasant
Martin Colony History: Have been hosting and providing a sanactuary for Purple Martins for 30 years.

Re: Strengthening Pole

Postby Rodger Drye » Thu Oct 17, 2019 11:57 pm

Hey Rob,

I did just that on one of my 2” Poles. Drilled some holes in the middle of the pole, then welded both halves flush together. I use a pole anchor at the base of all my Poles. 2 - 3/8 x 3’’ flat steel concreted in the ground 36” with 30’’ sticking out the top. I then drill two 5/8” holes through each of the 3” steel side pieces and of course through your pole. Rather it be a 2” or 3”, this way you can simply hinge or lay your pole down to R&R or do maintenance.

On yours if you wanted to keep your ground stake in the 2 bolts would definitely make your pole stronger. If you wanted to work on your pole you’d have to lift your pole up and over your ground stake...

Rodger
PMCA Member
Have been Hosting and Protecting Martin's for 30 years.

Rodger Drye
Posts: 607
Joined: Sun Mar 23, 2014 10:07 am
Location: NC/Mt. Pleasant
Martin Colony History: Have been hosting and providing a sanactuary for Purple Martins for 30 years.

Re: Strengthening Pole

Postby Rodger Drye » Wed Oct 23, 2019 1:23 pm

Hey Rob,

It’s been 2 or 3 years ago since I reinforced that pole, and it has made all the difference in the world. It’s just like it grew there. Can you weld Aluminum or know someone who can.? I can weld Aluminum and Steel, but I can’t afford the Aluminum set up. Fortunately I have a neighbor who has it all. I have a Millermatic Mig Welder and a Buzz Box.
I think you’re on the right track. Good Luck.!

Kindly,
Rodger
PMCA Member
Have been Hosting and Protecting Martin's for 30 years.

Harold Green
Posts: 42
Joined: Tue Jan 27, 2004 3:30 pm
Location: Georgia/excited

Re: Strengthening Pole

Postby Harold Green » Thu Oct 24, 2019 10:01 am

The easiest way i have found is get some two inch angle iron and heavy steel straps and band the angle iron in the weak spots,
this will stop all the sway.

~Ray~Gingerich
Posts: 2114
Joined: Mon Jan 05, 2004 10:24 pm
Location: Delaware/Dover

Re: Strengthening Pole

Postby ~Ray~Gingerich » Mon Oct 28, 2019 12:39 pm

A two inch by four ft angle iron at the base and fastened tightly to the pole would be a big help. We had a tornado this spring and my pole with the angle iron remained perfectly straight but the ones on either side were bent!
~Ray~ Gingerich
1999 1pair, 2006 2 pair, 2008 2 pair,
2009 23 pair, 2010 39 pair, 2011 67 pair,
2012 115 pair, 2013 160 pair,
2014 152 pair, 2015 174 pair, 2016 178 pair
2017 187 pair, 2018 200 pair

TerryW
Posts: 44
Joined: Tue Mar 12, 2019 12:02 pm
Location: Nashville, Arkansas

Re: Strengthening Pole

Postby TerryW » Thu Dec 12, 2019 1:20 pm

For 2" pipe the easy way is to pour overly wet mortar mix into bottom of pipe before erection. You just plug the bottom of the pipe and dump it into top of pipe and make sure it all collects at bottom using a ramrod, that you can make out of whatever. Hard to bend a pipe that has concrete in it.

Rafke77
Posts: 1
Joined: Sun Jan 12, 2020 10:47 pm
Location: Plymouth, IN
Martin Colony History: Year 1: 10 pair, 24 fledged, 15 eggs non-viable

Re: Strengthening Pole

Postby Rafke77 » Mon Jan 13, 2020 9:37 pm

*****ADMINISTRATOR******

This was another thread started by me. Please help me get my account back, I had logged a bunch of info on this forum in posts.
Thank you!!
-Rob


Return to “Purple Martin Forum”

Who is online

Users browsing this forum: MSN [Bot] and 19 guests